Print the first layer thick then subsequent layers as thin as you want. They should rename "Nozzle Diameter" to "extrusion width" since you can print really nice parts with the nozzle diameter setting at 0.07 mm but using a 0.35mm physical nozzle diameter. Using a smaller nozzle diameter setting will give you a much finer print and parts when combined with lower layer heights parts look super smooth. You can print using settings all the way down to 0.05mm layer height and 0.07 Nozzle Diameter. Use small layer height and nozzle diameter settings for fine finishes - MAKE SURE YOU KEEP THE "EXTRUSION WIDTH" "AUTO" BOX CHECKED. I don't know how much better it is but I'm sure some things are improved. If you have Simplify then download the newest version. Install the newest version - Simplify 3D 2.0.1 is out. These are a few things I've discovered by trial and error recently that have made my prints look much better. Feel free to post better ways to accomplish the same things.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |